Moonlight

Titan Two

The Titan Two carries Moonlight's stick output to a PS5 or Xbox. Moonlight loads its own script onto it every time you press Start, so you never need Gtuner.

The Titan Two sits between your controller and the console. Moonlight sends its stick output to the Titan Two, which passes it to the console along with your own input.

You do not need Gtuner. Moonlight loads its own script onto the Titan Two every time you press Start, so do not load scripts by hand.

#Wire it

  • PS5: plug your controller into one of the Titan Two's input ports, and a PS5mate or P5General into the other.
  • Xbox: plug your controller into the Titan Two. Nothing else is needed.
  • Connect the Titan Two's output to the console, and its PROG port to the Moonlight PC.

#In Moonlight

  1. Close Gtuner and any other Titan Two software. Only one program can talk to it.
  2. In Input Device, set Output to Titan Two.
  3. Under Controller Setup (Titan Two), set Console Output to the console you play on, for example PS5 or Xbox Series X|S, rather than Auto.
  4. Set Controller to the controller you plugged in. It decides which button names you can pick for the Aim, Flick and Trigger keys.
  5. Press Test X and Test Y and watch the stick move on the console. Neutral sends the stick back to the center.

Then set up the game and Moonlight's controller settings: Tune aim for a controller.

#If something goes wrong

What you seeWhat to do
"Titan Two: device not found (VID 2508 / PID 0032)"Plug the Titan Two's PROG port into the Moonlight PC. Try another USB port or cable.
"Titan Two HID output did not open"Close Gtuner and anything else using the Titan Two, then press Start again.
"Titan Two: ... failed", for example the receiver uploadUnplug the Titan Two, plug it back in and press Start again.
The console stops accepting the controllerSet Console Output to your console instead of Auto.

If it keeps failing, post in the #support channel of the Moonlight Discord and attach the file ending in _app_log.log from C:\MoonLightAI, or ask support to open a support session (web control must be on).

Stuck on a step? Ask in the Moonlight Discord and a staff member will help.